Tarmac@TarmacSportz

Personal experience is you will get bored of the lack of tone with the Scorpion. Add a Stillen Y pipe at a later date and that will give a nice tone then add some Berk HFCs and you will have an even nicer tone. The beauty is you can do it in stages and stagger your costs but honestly the Scorpion on it's own is tame (IMO).

Possibly but might not fit at the right angle

No - they only come in Gold

Hi Guys You may have seen this already, its took a long time to make this happen but the end results are pretty stunning. FRP - Strosek style rear spoiler, comes un painted Black aluminum brackets which fit to the OEM spoiler, you must have an OEM spoiler to fit this too, I have a spare used one if required. Currently have just 1 available so contact me if you want to order and I will check availability at the time Here are some pics on one of the nicest 350z's on the Forum: Quote on fitting from customer: OEM spoiler was left in situ and drilled through and bolted on from inside the boot, when you remove the rear plastic there are four holes, the two centres ones giving you access to the front bolt position, holes needed to widened slightly to get the rear bolts in. 50 mm bolts to attach are required. https://www.tarmacsportz.co.uk/interior-and-exterior/350z-frp-strosek-style-rear-spoiler.html

Hi All I have 5 sets in current stock ready to go at £125 delivered TARMAC SPORTZ 350Z OEM CARBON FIBRE CANARD TWIN SET TARMAC SPORTZ 350Z OEM CARBON FIBRE CANARD TWIN SET Our CARBON FIBRE CANARD TWIN SET comes ready to fit straight on to your Zed. They give an aggressive styling, for best results we recommend attaching with tiger seal or similar. Fits Nissan 350Z 03-05 OEM Bumper

Right - keep them coming P.S. Next one to deviate from the list doesn't get a discount 1. DanS - 20mm & 25mm 2. pauljames90 - 20mm & 25mm 3. PMX - 20mm & 25mm 4. bc1987 - 20mm & 25mm 5. veeg33 - 20mm & 25mm 6. alanm - 20mm & 25mm 7. ZedManTID - 20mm & 25mm 8. Mike1989 - 20mm & 25mm 9. GasZed - 20mm & 25mm

Group buy price is £100 providing we get the numbers

Yup 1. DanS

Hi All Due to lots of requests on this I have decided to do a GB for a maximum of 15 people. The Group buy will run for two weeks, and the spacers will made to order and be ready for shipment two weeks after, Payment will be required after the GB ends, please put your name down in an orderly fashion. The spacers are made from Aluminum Alloy T-6063 with T-7075 Lug nuts. Available in 5x114.3 in either 20mm or 25mm. Lightweight Alloy T-6063 construction Hubcentric spacers (Pair) Bolt on design without modification Gives a wider stance and fills the arches on your car 20mm rrp £70 per set 25mm rrp £75 per set (Pic below is of a pair of 25mm spacers)

Dave does have a point, It is hilarious ragging the balls out of a car with less power, I always go back to a track day I had, Ferrari, Porsche, Impreza and an Elise. The Elise although the lowest spec and power of all of them was by far the most fun.

One of these ? http://www.gtspec.com/product/gtspec-rear-lower-tie-brace-350zg35g37

^ Boring ?? I certainly wouldn't call it that, driving is not just about driving fast in a straight line, The 86 comes alive in the twisties, that's where the fun is at

They are slow standard, removing cats etc doesn't make a deal of difference but a Super Charger helps, they do look good with a few choice mods too.

No probs, got the diffusers on ?

^ I told you the other day bud? Should be mid month fingers crossed HR's are here and members pm'd

Yeah me too

You can sell it now Cal as your replacement arrived today

Hi Guys I currently have one available pics below. They are gloss black FRP Fitting: Due to shape these will require Tiger sealing (or similar) in place, would suggest clamping in place while it sets or screwing into rear bumper.

Motordyne have just turned around a 350z exhaust in a week for me

Lol, doubt it and would probably be something stupid like £1200

Yeah I pressed quote by mistake and then thought feck it, least I've told you twice

I'm out of stock I would prepare yourself though, Replicas are cheap for a reason, they require a lot of work, usually painting prepping and fitting is more than the cost of the item in the first place.

Hi guys Got this unpacked today, it's absolutely stunning. Excellent quality and really looks the dog danglies Whoever takes the offer up will get a steal

Yeah FED-EX are good, one of the only couriers with around 99% success rate

All though I feel your pain, there are horror stories with all courier companies unfortunately. Paisley Freight aren't really a courier, they are just an agent. I would imagine it was picked up by TNT Sucks but it happens