Tarmac@TarmacSportz

Thread updated

Plain black bud Drop me a pm with your email address and I will send you a Paypal invoice

Smaller orders will all be going out this week. Please note, large items take a bit longer - side diffusers, lips, spoilers etc will be delivered early next week

Thanks, page 1 updated with Ark price

I would think 1.1 or 1.6 would be fine, i'm not an expert on 3M tape though, I've had tiger seal on my last two cars and find its the best for sticking bits onto your car. Because it won't fit correctly if its painted first, it needs to be moulded and secured to the bumper. If it' painted prior to this then you won't get a good fitment, you will struggle to mould it into shape and at very best you will have to get it re-painted.

For anyone purchasing PU front lips, please have a read below http://www.350z-uk.com/topic/111480-polyurethane-lips-installation-guide-and-tips/

Hi All As we are selling a lot of PU lips this month so I wanted to put a bit of a guide with some tips on installation. PU is a lot different to FRP - surprisingly there are a lot of so called professionals that have no clue what to do with PU lips so choose the installer carefully or do it yourself with this guide. Buster aka Bob has fitted a number of these over the years and had to correct some balls up by "specialists" too. Firstly - DO NOT PAINT LIP BEFORE INSTALLATION Best tools for the job are Tiger Seal or 3M tape, hair dryer or heat gun and self tapping screws. Polyurethane is rubber, it can be flexible or brittle depending on the temperatures, in warm weather they are usually more flexible than in the winter but you may need to warm it up gently with a hair dryer or heat gun to get it to flex in difficult areas such as around wheel arches. Easiest way to fit them is by taking the bumper off as the bumper will flex making it easier to install the lip and wrap it around the bumper, I would advise you mask the area where the lip is being fitted to avoid scratching. Once the lip is in place screw the rear of the lip where it wraps around the wheel arch. Also doesn't do any harm putting some screws in the underside. For the front you can either use 3M tape or Tiger seal, This will then need either clamping in place to set or screwing in place - leave over night to set. Now - no lip is ever 100% perfect, I had a Varis carbon lip on a zed 8 years ago and when you looked close there were gaps around the centre grill section - its the way it is when you mod cars. However, once you are at the stage above a bodyshop can fill the small gaps, fill the screw holes if required and then prime and paint. A lot of people leave them as they are in bare form and thats up to you but it is recommended they are painted. Below is a link to one of our customers 350z with a GT Lip: This lip has been installed correctly. http://www.ilovebass...s-350z/#photo-4 http://www.ilovebass...rs-nissan-350z/ Our website https://www.tarmacsportz.co.uk/ If you take it somewhere and they say it doesn't fit it's usually because they have no experience in PU and don't know how it works, Don't take it to an accident repair centre unless you have already fitted it and just want it painted as they rarely understand anything about aftermarket parts. We have been selling PU lips for over 6 years and I can honestly tell you we have never had one that hasn't fit, sure we have had returns and resold them to people that know what they are doing but they have all fitted, you have just got to do a bit more prep and understand the product. Here is a youtube link to the most difficult to fit front lip we sell, the S2000 AP2 OEM Front lip, its a bit long winded but he is doing most of the install correctly, I would be a tad more careful not to scratch the bumper though if it was me. If anyone has any further tips feel free to post them or any questions please let me know

We have stainless tipped in stock at the moment Can order titanium in, 5-7 working days £899 - I can chuck in an Apexi filter or some wheel nuts if your quick

have you any more info on the single exit We sell them on eBay for £399 Here is a link http://www.ebay.co.uk/itm/350z-ISR-Formerly-ISIS-Performance-Single-Exit-GT-Exhaust-Nissan-350z-DE-/162077191994?hash=item25bc8daf3a:g:73cAAOSwFMZWsckJ On offer at £325 for 10 days

Yup

ISR's on offer at £325 now

UPDATED Don't forget - Dibs on the thread and then send a pm with your paypal address and item you want x

They are yes BUT... Sold as Decats as no idea on the condition of the internals - if I knew they were good then they wouldn't be £35 so it's entirely up to the buyer. There are no come backs on these so it will be a punt by whoever takes them - could be a hassle or could be a diamond in the rough.

Updated

Thanks so far guys - I think all pm's are replied to Don't forget - Dibs on the thread and then send a pm with your paypal address and item you want x

Please note It's my anniversary and my wife is kicking off at me as its took me since I got home to do this thread Keep reserving on the thread and I will catch up with you tomorrow or I will have no balls left

SALE THREAD BELOW http://www.350z-uk.com/topic/111448-sale-tarmac-sportz-moving-sale-350370z/

Read first please:Please note these parts are on sale in limited quantities only, first come first served - *** To order please dibs on thread and then PM me your Paypal address and item wanted** Note - orders over £300 must be paid by card - pm me.Sale ends Thursday 22nd September then normal prices resume Returns not accepted on end of line or damaged parts Please please be patient as i'm stacked out with the move, please be patient on replies and shipping - I will reply/ship as soon as I can.I've tried to link pics and descriptions but If you want to request more pics then either pm me your number or make friends with "Chris Tarmac Sportz" on facebook as I don't have time to do photobucket at the moment.Please don't bung up the thread with questions or off topic discussions 350z Exterior Parts: 350z JDM SATIN Z LOGO EMBLEM BADGE £15 each or £25 for two http://www.tarmacspo...LOGOSATIN_.aspx 350z Side Diffusers £150 (0 set available) http://www.tarmacspo...50TSFRPSD_.aspx Tarmac Sports FRP Roof Spoiler £80 each (1 available) *** note also one available in Carbon Fibre £120http://www.tarmacspo...50TSFRPRS_.aspx 350z EPR Rocket Bunny rear spoilers £125 (2 available) We bought these in from EPR, they are ok but not amazing so we won't buy any more - end of line part professional installation recommended .http://www.ebay.co.u...3gAAOSw9r1WAmnQ 350z Duraflex Ings style rear spoiler £150 (1 available) Note - this has been pre sanded by ourselves- end of line part professional installation recommended as adjustments may be required. http://www.ebay.co.u...R-/121806573668 TARMAC SPORTZ 350Z OEM GLOSS BLACK FRP CANARD TWIN SET £60 a set (2 available) http://www.tarmacspo...RP-0EMCAN_.aspx TARMAC SPORTZ 350Z OEM CARBON FIBRE CANARD TWIN SET £80 a set (4 available) Also have one set in Kevlar at £80http://www.tarmacspo...CF-0EMCAN_.aspx LED Bumper reflectors - PRE Facelift with carbon backing £40 (5 available) Facelift £60 (2 available)We did have a customer complain on these as they don't light up the road at night time - this is true, they are more of a subtle style mod than anything else, Buster has them on his car and they do look really cool - end of line part http://www.350z-uk.c...per-reflectors/Relay harnesses are sold on ebay as below - not by us:http://www.ebay.co.u...=STRK:MEBIDX:IT 350Z FRP NISMO STYLE GLOSS BLACK REAR SPATS (1 available) £110 http://www.tarmacspo...50SPAT-BL_.aspx Stillen Louvres (0 available) £175 http://www.tarmacspo...Z-1035099_.aspx Stillen Roof Wing (1 available) £175 http://www.tarmacspo...Z-1035050_.aspx G35 style rear spats gloss black **new item** £75, (2 available), these are ones we have had made up, The genuine ones are plastic and you need to trim the inside so we made ones that are easier to fit, haven't advertised these yet as the customer who was doing the photography got rear ended before doing pics but they will look like the pics in the link below, they are gloss black but can be painted any colour http://www.350z-uk.c...uine-nissan-99/ Tarmac Sportz Carbon Fibre Slam Panel 03-05 £55 (0 available) this is the shorter version slam panel same as Mishimoto and various others, we are making a new full length version soon so this is an end of line product http://www.tarmacspo...350TSCFSP_.aspx Tarmac Sportz 350z strosek style spoiler £250 (0 available) http://www.350z-uk.c...ar-spoiler-299/ 03-05 350z Pre facelift lips: 350z 2003-2005 GT STYLE POLYURETHANE FRONT LIP £100 (0 available) http://www.tarmacspo...U-53503GT_.aspx Genuine Veilside Version 1 front lip and sides (not rear) - very rare original parts - used but in excellent condition £400 (1 available) http://www.intensepo...ilbodkitfi.html 350z 03-05 Nismo-Style PU Front Lip (0 available) £75 http://www.tarmacspo...50ZFLS-SP_.aspx 350Z TARMAC SPORTZ FRP V1 STYLE FRONT LIP (0 available) end of line part professional installation recommended as adjustments may be required. This is our old style lip, its the same as most others available but we recently updated the design and made it much better £100 http://www.tarmacspo...0TSV1FLIP_.aspx 350z Stillen Splitter - In my opinion one of the best for the 350z £275 (0 available) http://www.tarmacspo...-350zsplit.aspx 350z Stillen Front lip - vary rare in the UK £250 (1 available) http://www.tarmacspo...Z-1035011_.aspx 06-08 350z Facelift lips 350z Nismo lips (3 available) - I don't have pics on the website but they are similar to below £99 (should be £135) http://www.tarmacspo...50ZFLS-SP_.aspx 350z 2006-2008 GT STYLE POLYURETHANE FRONT LIP (0 available) £120 http://www.tarmacspo...-NS3506GT_.aspx 350z Parts 350z twin A Pillar gauge pods 52mm or 60mm £30 http://www.350z-uk.c...r-gauge-holder/ Berk Technology Nissan 350Z 03-06 Metallic High Flow Cats £400 (2 available) http://www.tarmacspo...1-HFC-MET_.aspx 350z Ark Grip dual exhaust (1 available) £1150 http://www.tarmacspo...900-0030G_.aspx 350z ISR Single exit exhaust £325 - end of line product as supplier as a pain to deal with (5 available) http://www.ebay.co.u...3cAAOSwFMZWsckJ 350z ISR Transmission mount £65 end of line product as supplier as a pain to deal with (3 available) http://www.isrperfor...n-350z-g35-z33/ AAM Competition oil pan spacer for VQ35DE £150 (1 available) http://www.tarmacspo...AM35M-OPS_.aspx Berk Technology Nissan 350Z 03-06 Metallic High Flow Cats used (0 available) Sold as decats - may require centre removing £35 http://www.tarmacspo...1-HFC-MET_.aspx Milltek Half system - Customer return as one of the welds on the back box isn't particulary pretty but does not effect performance and unseen when fitted - end of line product (1 available) £425 http://www.tarmacspo...ms/350MILT.aspx Apexi panel filter DE (0 available) £27.50 http://www.amber-per...php?xProd=24356 NRG Grounding kit red (0 available) £35 http://www.getnrg.co...product_id=1432 350z DE Mishimoto Hose Kit Black £75 (1 available) http://www.mishimoto...adiator-03.html GATES RACING MICRO-V BELT k040220rb £30 (0 available) http://www.mvpmotors.../i-2121579.aspx 350Z Clutch line and Brake line set "Brembo" £85 (1 available) - arrived today from a supplier having a clearance - ironic lol , Brake lines are made by HEL but have other branding on them 350z DE HKS Premium Intake system - so rare they aren't even on the internet lol, basically its a hybrid performance panel filter and polished intake pipe with purple silicone joints and HKS logo, these RRP'd at £300, i've got two here, as I say rarer than hen's teeth £185 similar to below pic - SOLD http://www.hksusa.co...um-suction-kit/ 350z technafit clutch lines £20 (3 available) http://www.tarmacspo...0z-NC-310_.aspx 370z Parts 370z TS Side diffusers £165 (4 available) http://www.tarmacspo...70TSFRPSD_.aspx 370z Stillen roof wing £165 (0 available) http://www.tarmacspo...Z-KB11124_.aspx 370z TS Front lip £150 primed £170 Black (1 of each available)http://www.ebay.co.u...9MAAOSwoydWoN7c370z TS rear spats primed £125(2 available) http://www.350z-uk.c...-available-160/ 370z TS rear diffuser Zele style £150 (0 available) http://www.350z-uk.c...r-in-stock-199/ Stillen Gen 3 intake (1 available) £490 http://www.tarmacspo...0Z-402852_.aspx 370z Front an RearZ Emblem badges in satin silver or chrome £30 a set - same as below (approx 5 of each available) http://www.ebay.co.u...RMAAOSw-vlVkHRBhttp://www.ebay.co.u...1kAAOSw-vlVkE6A 370z Carbon fibre mirror covers £65 (2 available) Note these are covers and are never perfect on wing mirrors, I had them on my 370z and they did look good but do require a lot of sticking in place, they work better on dark coloured cars. Cheapest available - end of line part http://www.ebay.co.u...o8AAOSwFqJWrZ8n Wheels and nuts We only have one set in thats suitable for 350/370z'sJR21 19x9.5 ET25 / 19x11 ET22 Matt black - Concave (sold) £750 for the set - Not many pics available but I think you will get a feel from below (SOLD) https://scontent.cdn...4NDY0MTUwMA==.2http://scontent.cdni...2Mzk1NzAyNg==.2http://www.350z-uk.c...-tarmac-sportz/ Spline driven Wheel nuts - various colours all £20 a set http://www.350z-uk.c...-from-25-a-set/ If I find more I will add

I didn't say when next week Should have somethings up tonight - working on it now !!

Hi All As some of you will know from social media we are moving to a bigger and better unit end of this month. We have a lot of 350z/370z stock on the shelves that I plan on putting on sale so we don't have to make so many trips with the Lorry. I will keep you posted as I sift through it all but there will be a fair amount of parts so keep some cash handy.

I can't see the Cobra HFC's on your website, have you stopped selling them? Are the more likely to pass an MOT emissions test? They are in the Cobra store section below: http://www.tarmacsportz.co.uk/cobra-shop.aspx To be honest HFCs seem to be one of those things where its just bad luck if they fail. I would say percentage wise its pretty low - we have sold hundreds and we have had a handful fail. Berk only come with 12 months warranty where as Cobra come with 2 years so its worth thinking about. No one offers more than 2 years to my knowledge. If you give the car a good blast before the MOT you should be fine

I've got Berk/Ark combo fitted and its a decent sound As mentioned I would try the Ark on its own first and then see how you get on.

Hi Jack Yeah if you order today I can have a set in for early next week

yup - plenty of black

Congrats Col