SHEZZA

I've got an old Clio 1.5dci for knocking around in. Even got a set of winter tyres for it haha , though not bothered putting them on yet this year. Luckily I also have a van for work, even got winter tyres on that and they make a world of difference especially with it being rear wheel drive with hardly any weight in the back . So the zeds never seen much snow.

Welcome along. I remember following Gudzy around Wales in 2014 , just got my hearing back ! Haha is the exhaust still the same ?

Happy Birthday Rob, hope you had a good one.

Depends wether it has a boot full of goodies Adrian. Haha

Haha your right it's one of my old mans from when he was into market gardening so it's free. Bought the new 3m sliding doors for it though as it used to have a single door and a couple of opening lights. Comes ready equipped with lights power and mains gas for a heater.

Definitely get a garage if you can, ...otherwise there is another cheaper option available to you that you may want to consider? Or cheaper still stick it in an old poly tunnel.

01 MrsNiki + 1 - Hotel booked 3rd/4th June 02 Buster and Mrs Buster - Hotel booked 3rd/4th June 03 Andy and Katrina - Hotel booked 04 ATTAK Z - Sunday drive + lunch (Hope I'll be able to keep up in my non-Zed ) 05 Paul K and Mrs K - Hotel booked 3rd/4th June 06 Davedutch and Mrs - no need for hotel 07 Shezza + 1 - Hotel booked 3rd/4th June 08 Mattross1313 - Hotel booked 3rd/4th June 09 Jetset + 1 - Hotel booked 3rd June 10 Spoons + 1 - Hotel to be booked tomorrow. (brand new Z owners, looking forward) 11 Mr & Mrs N13gey - Hotel booked 3rd/4th June 12 Stoker 11 + 1 - Hotel booked 3rd/4th June 13 Brummiestormer No hotel needed 14 Gudzy No hotel required (Not in a zed) 15 Spatt No hotel needed (looking forward to both drives and I'll be around on the Saturday night)

For 18" Ray's maybe, but not for 19" LMGT4's surely.

If your looking for OEM check this thread out. http://www.350z-uk.com/topic/104023-cheap-brembo-pads-and-discs-are-back-on-sale/

Try a PM to Zedmanalex for a used one.

That goes without saying. How about that wish list in your sig Nic.

Welcome along. Where about are you from then if you've been to see Mitz.

Happy new year all. Bring on the new season.

Welcome along. I became active on here after owing my zed for five years ! And have never looked back.

Are the OEM discs and pads Brembo as well? Or is it just the calliper? Also, which pads, I think these as they match the shape of the calliper http://www.eurocarparts.com/ecp/c/Nissan_350Z_3.5_2008/p/car-parts/brakes/brake-friction/brake-pad/?10170047A&1&f2ca931ca910da00f4c7ab682d107b4ffd0087c1&000036 But these also showed up when I put in my reg? http://www.eurocarparts.com/ecp/c/Nissan_350Z_3.5_2008/p/car-parts/brakes/brake-friction/brake-pad/?10170036A&1&5407d9d227d7b05fa5e3c60f3da4f69e79dcb084&000036 Yes the OEM discs and pads are brembo but youll find the ones other than from the main dealer are after market believe it or not for example the pads from the main dealer come with new shims, pins and copper grease and are usually £100 + a set I also believe there's more meat to them and the compound is different. Also the pad face is split in two. I'm not saying to get those and the discs from the main dealer as they are a ridiculous price. The option that has been given above is a good call. http://www.ebay.co.uk/ulk/itm/400244956916

Show off ! Haha

All ways fancied the titanium one myself aswell ,but like you said a little dear. Wasn't that keen on the chrome as nothing else in the car is chrome or carbon so I went for the black one.

Not that it'll make a huge difference but what's the profile of the tyres on the front as the 370 profile is 40 on a 19" rim and 35 on a 350, 19" rim. Maybe that's why it seems a little higher, on the front at least.

1. 370Ad - Stand Pass + Track Time - PAID 2. MrsNiki - Stand Pass only - PAID 3. Rickdon - Stand Pass maybe track time 4. Stuggerz - Stand Pass only PAID 5. Valy - Stand Pass - PAID 6. glrnet -Stand Pass 7. Ogman - Stand Pass + Track Time (as it's my birthday) 8. Chippychip123- Stand Pass PAID 9. Ozzy225 - Stand Pass + Track time 10. Shezza - Stand Pass - PAID 11. Roobies8 - Stand Pass only PAID 12. AdamTSmith350 - Stand Pass only 13. Garygranite - Stand Pass 14. Chizzz - Stand Pass 15. Tea and Wax - Stand pass 16. SherlockH -Stand Pass & Track Time 17. Paul K - Stand Pass - PAID 18. Dean_m Stand Pass only 19. SYY - stand pass and track time PAID 20. Wendy - Stand Pass 21. WINKJ - Stand Pass 22. Lloydshaw - Stand Pass PAID 23. Condor109 - Stand Pass 24. harryjackson - Stand Pass & (maybe) Track Time 25. Beagle - Stand Pass & (maybe) track time 26. Has - Stand Pass 27. crute/higgins350z - stand 28. GreenLandy - stand + track - PAID 29. choptop - Stand Pass 30. Rich260- stand pass& track time 31. Shire350z - stand pass 32. Justthejedi - stand pass 33. AmyZed - stand pass 34. Kraziekatz1 - stand pass & Track (whaa hoo.....get ready everyone ) 35. Jakeswheelbarrow - stand pass PAID 36. Flex - Stand (Maybe) 37. Bobby D - stand pass - PAID 38. ZeppoJeff - Stand Pass (work depending

Sorry to hear this Has and hope you get it resolved as easily as possible. In future take the zed to the cougarstore a highly recommended indie on here for work which is in Leicester.

That's one bad ass zed. Love it.

Nice try Mikey, though think he's already got two sets. Haha

yeah it was after i had got back from work i remembered i had my go pro with me so thought i would get a quick vid Yeah Im not sure why? i know people had a bit of an issue with fitment but that all seems to be a while ago and i had no issues... Think the main issue was with the K2's. I had one and the fitment was awful ! Loved the sound though, until it started ratlling ! Haha. The K1's seemed to be ok though. You must have dropped on a good one bradders.

^^ exactly I wouldn't bother with a switch other than to over ride the PIR's. No 2 way switching needed then. As either PIR will switch the lights on and then automatically time off.

Hi as Paul said you'd be best to have 2 drivers one for each strip and I would recommend that you use mains voltage PIR's to switch the supply on to the drivers as you don't won't the drivers permanently on if like you've shown using the 12v PIR's switching the supply on to the strips after the drivers. As for 2 way switching if your only fitting PIR's all you need to do is wire the two PIR's in parallel. So either one will switch the lights on like a 1 way switch.