Beavis

Not very. IIRC Sarnie got an extra 60-80 miles before he filled up again aftert the ---- came up on his DTE.

If all that was live, you have something seriously wrong with your electrical protection circuit!

All good poker players do a spot of fishing

Really??? One or two members actally think there is too much positive and not enough negative stuff comments! But glad your happy with the service from Lee

I blame that Chesterfield, dam tripping over the cable all the time and pulling the plug out!

Pleasantness? My tip came just after finishing a 12 hour night shift for the fifth straight night. But just to be sure though you have done a cracking job.

+1 Just slacken off the two outer bolts, and re-align and re-tighten. Over tightening can cause this mis-alignment. Not slacking off at all. We've spent over a week lining everything up just the front end and with out having to replace the wings and brackets also jigging the front end of the car this is the closest you can get. The front bumper is fibreglass so you cant bend it without risking it cracking or webbing. Better to have the drivers side wing line up perfectly and passengers side in by 1.5mm than have drivers side off by 6mm and have uneven gaping gaps around both head lamps don't you think? The wing was bent back into shape and repaired before it came to us and the mounting brackets where warped. We straightened them out and spaced out the excess with washers where needed and same goes to the head lamps in order to achieve an all round even line up between the lamps, bumper and wings. Trust me when I say we're not amateurs at this. We've discovered many repaired bits, broken or missing fixings and brackets which we've addressed. Not something many body shops will do. Steve have you got any before pictures for people to really appreciate what we've done? WOW Who called you an amateur? And i do appreciate the quality of the work you have done, check my earlier post I was talking from experience when i had my original front bumper taken off and re-fitted, i slackened the two bolts off and it lined up much better.......thats all! So no need to get earlier pics up from before i appreciate the good work you have done. Next time i will keep my big mouth shut Yes Colin, but will stay quiet next time, after all its only a forum!

+1 Just slacken off the two outer bolts, and re-align and re-tighten. Over tightening can cause this mis-alignment.

But massively lighter than the notoriously heavy GT4 wheels which iirc are knocking on the door of 25lb Thats why they gave the GT4 20 bhp more, just to drive the extra wheel weight

+1 Saw that on the 6pm news

Very nice

I was dusted off and coaxed out of retirement Vik Think Ricey started a thread last week but thankfully nobody noticed thanks to the riots. It was a good day to bury bad news. viewtopic.php?f=13&t=52654&hilit=looking+green

Added the pictures for you. The keen eyed amongst you will have noticed that Joe only as 11 posts, but on request the team have decided to allow the ad on this occasion. Joe has been a member for just under 3 months and was at a recent Scottish meet and is known to one or two of the contingent north of the border GLWTS lovely looking car that would be a very good buy for someone

Mine has always rattled for about a second on start up most of the time, even with oil like wine and a reguarly changed filter. I never worry about it.

to the forum. Topic moved.

to the forum

to the forum

to the forum

Split it Colin.

Certainly not a normal noise that should be heard on a standard flywheel/clutch with the pedal up (if thats the case)! Sounds awful.

I assume you are talking about Holdcrofts?

Looks like he's doing quite well out of it and having the last laugh. 20K raised already http://somethingniceforashraf.tumblr.com/

Proper music.Proper music video Here's another classic. The guitar spinning at 1.49 http://www.youtube.com/watch?v=6EXXZVdUJ98

Look shite imho But hey we are all different