BulletMagnet

Signal Auto 350Z

Design wise it looks near on identical to a Tanabe Medallion that Tarmac is thinking of supplying, just the tips look different viewtopic.php?f=38&t=47153

depends on wheel width too tho Neil. The LMGT4's you are running are how wide again? 9.5 at the front and 10.5 at the rear?

and when they do, swap them over, lol

I think you should tell your mate to stop using that stuff on clear plastics Or even better stop using it altogether. Wet & dry route and then rubbing compound, someone did a DIY on here somewhere and it only took him about half an hour per headlight. Couldn't find the thread on here, but found this one instead http://my350z.com/forum/repairing-and-d ... ost8048767

What is that guy thinking screeching away from a cop? And then acting all hard when he gets out only to be told, haha http://www.youtube.com/watch?v=6q-EOLo7Fq0

I'm currently driving a 370Z in the GT Academy Time Trials on Gran Turismo 5. My lap times are improving and I am chasing the leader who put down a superb lap in at 2:16.xxx. My current best is 2:25.734, and I know I can improve. I've got till April 17th to log a Top 20 laptime, so really hoping I can

But we haz got da John Nike Leisure Center, innit. Ok, will stop it now

Aiiiiiiiiiiiiiiiiiiii!!! Westside iz da best! Sorry couldn't resist

Just watch your speed and be more observant in the future. Just cos you have a sports car don't mean you have to drive "sporty" all the time. We ain't garyboys you know.

This is a video released in Japan explaining what is going on in Fukushima. It's something you watch and definitely learn from, but can't help thinking afterwards "Wtf did I just watch?!?!?"

Mmmmmm, yummy

How about disconnecting the hose and taking the whole wiperarm off instead?

Perhaps taking the blocked bit and soaking it in warm soapy water and then try pin/air line/bicycle pump/Jedi mindtrick to unblock?

Would the LED amber bulbs work? The same guy that sells the Rear Fog red LED bulb, warden_jp2002 sells these: http://cgi.ebay.co.uk/2pcs-501-W5W-1W-H ... 2c5b4ec972 Any good? he's also got other amber LED bulbs in stock. Opinions / Advice please

Try this one instead http://my350z.com/forum/body-interior-e ... tures.html

you know you want it http://www.swiftmotorsports.com/ I seem to remember someone on here who found a uk supplier for these? and had one fitted? I will need one soon too with luck! All I can recall is rtbiscuit organized a groupbuy from swiftmotorsports for the forum

No, I mean a Zed, that has recently been sold and has above mentioned bits and was in mags. The ex Max Power Zed.

There is actually a whole thread on this already, even someone who has attempted this without success. Reason being that the US version of the key is different to the UK version. The US version has just a standard key and the alarm fob is a separate item. Whereas the UK key has the alarmfob built into the key itself. The new switchblade key housing is slim and has just enough space to hold the internals of the US alarmfob, but the UK alarm internals are too wide to fit and the buttons won't line up either. So unless somebody designs a switchblade keyfob housing to take the width of the UK fob it's not going to be possible to do. Save your pennies

It's not a white one with a CF bonnet, CF tailgate and INGS+1 front bumper is it? If it is then I'll do more than just die a little when I see it :lol:

I got the same Tein Springs, just give it a couple more days for them to settle

Doesn't rtbiscuit do graphics dipping? On topic of "Just buy another one" it's gonna be quite hard as it seems to be very hard to source Varis CF lips at the moment. You might have to opt for a different lip or bumper altogether.

Thanks for the tip, but I cannot use flat tape. There is a hollow space in the underside, hence me using numberplate tape. I think the 1mm is too thin. I have like some 3mm somewhere and will try that.