BulletMagnet

Stupid Question Alert Are you sure you connected the RCA to the correct input on the HU?

Gotta be either one of these

The wires on mine are thick cos those are the extention wires I added so I could reach the main grounding point. You could try the cam in the car off that 12v battery and see if it works?

If it works fine on the tv, then it's probably the right one. Dave, did you lay a wire to give signal to HU?

Be careful, i had an incedent where i hooked it all up, checked it was working before putting it all bacl, sure enough it did, put everything back and then it didn't work. took everything out the boot again an noticed i had pulled the power off the scotchtap while putting the styrofoam back in. re-done it and all was well. Did you use the green or the pale green wire? it should be the pale green

Well.....there is one way to find out

Halfords do outdoor covers that's breathable and has lining so as to not scratch the paintwork. Didn't someone mention tiger p1$$ in the other thread?

Good call Lee. I'll stick up a pic I took earlier when I'm back home from work. About a good 4mm tread left in centre and one shoulder.

Longest rainfall nonstop I have witnessed was one week, mind you this was in Hong Kong during rain season

Oh my, that's some serious waterdamage. Glad I don't live at the lower part of town

Before I even stick anything in the For Sale section, I was wondering if anybody would even be interested in used Falkens. I just put new fronts on and noticed that the main wear is on the shoulder, the centre and the other shoulder seem fine, due to slight camber. But would anybody even buy them for track usage? They are 245/35 R19 Falken 452

yup. that;s basically it, I used some generic 1.5mm wire to the HU signal and added a female bullet connector to the end (HU side is male of course)

I'm gonna take my doors apart too, hoping that the car belonged to a mob boss at some point and stashed millions of £££'s in there

I don't have the driver side cos that's on the car. Bought them as a pair and thus have the passenger side spare. Just PM me your address and I'll send it out to you for say £10 + p&p?

I have to disagree. Having worked with both, I find the Hexis is much better, at least when it comes to the CF vinyl. Plus the Hexis stuff is more flexible then the 3M, which is better for wrapping interiors with complex shapes. Hexis > 3M all day

I just wanted one day off from using Google to search for something, just one day, but nooooooo, I get a Lexx instead

I've no idea! But I'm looking to take that off as well. If you would be so kind to take more pics from different angles and what you want for it, then I'll get a better idea, thanks No-one ever listens to me As I said earlier, its a CTD-Germany spoiler. http://www.ctd-germany.com/shop/Nissan- ... :1588.html Yes Lexx, I read what you wrote, but I would like to see a real world picture on a members car rather then an optimized made for advertizing one

Brilliant It's deffo a two man job, it's impossible to do alone. And only do a little bit at a time, as in dont peel the backing paper unles you are working on the section. Peel, heat, work with squeege to avoid bubbles and creases, repeat till done. Go on, have another go Cos before I did the Hexis CF wrap on the roof, I attempted a 3M gloss back roof vinyl, on my own and I also made a lovely vinyl swan out of it instead, lol

Ok, found this But sadly one of the tabs has broken.

I've no idea! But I'm looking to take that off as well. If you would be so kind to take more pics from different angles and what you want for it, then I'll get a better idea, thanks

What's the spoiler?

Dunno if this was ever asked, but does your supplier do these with less pressure for those with lighter carbon bonnets?

Reading the description, why would the seller even write "Only opened box to take photo, buy as seen" He knows something is wring and if you take a closer look at the picture, something doesn't look right with the front shocks. I know they are coilovers, but they should be at least the same length tho.

Oh damn, by the time I got home last night I was so knackered I totally forgot to look for the trim piece, will look tonight after work, promise

I think leonk means a structural geometry check, not the laser wheel alignment. Having the four wheels aligned should be a given anyway.