GT4 Zed

Hi mate, i'm after the plastic trim on the passenger side of the rear strut brace. how much? i can send you a pic of this if you want. Would you have the upper rubber door weather strips(NS and OS)? mind have deteriorated and now let in wind noice to drive me nuts cheers

Hi mate, i have been there i did this conversion and it works but is impractical as i will explain. i left the oem xenon unchanged but converted the H7 high beam light with a 6000k kit complete with ballast, xenon bulbs and loom and it was a straight forward conversion. However because you ususally flash on and off you headlight it never gets up to temp and hence the poor light. unless you put it on and drive, blinding everyone in your path it will be useless. Secondly the xenon bulbs longevity will be markedly reduced with this kind of usage. The only solution is to buy the 06+ bi-xenon light set which is not cheap. there is a single xenon bulb which has a shutter operated by a solenoid that allows or prevents more light through producing you dipped or high beam My solution was to get 7500K rated 80W H7 bulbs and replace oem ones and it looks like xenons and very bright. they are not for road use apparently As LED conversion of the parking lights completes the look

Any takers? i will be making discounts for purchased between now and sunday before i list them on fleabay

Sad to hear this happenned m8:wacko: Wish your wife a rapid recovery and full return to health. As for those idiots, i hope they get what they deserve.

Sad to hear this happenned m8:wacko: Wish your wife a rapid recovery and full return to health. As for those idiots, i hope they get what they deserve.

Provisionally, but you have first refusal if it goes t-ts up

Great Loss. Adieu Jacko He should be remembered for his enormous talent and achievements. there were a lot of rumours and litigations and he was never found guilty i believe he was an oddball but that's not a crime

1+

Excellent development Was this test mule a standard car or with some mods? if so which

From: http://www.groundingkits.co.uk/

Here we go 1-GT4 Zed 2- Nurrish 3-

I was about to commision a custom 3" exhaust system(Race HFC and y-pipe) to match my 3" Fujitsubo legalis y-pipe back exhaust from this custom race exhaust specialist who does all the custom work on evos, scooby, skylines, hondas and also BMW and Audi etc for Alan jeffery engineering in the southwest. He has built a full system (headers back) for a zed with an APS TT Kit so knows what is required for maximum gains sound and durability. Unlike your "joe welder" he trained to do this and builds all his systems from scratch including resonators , mufflers/back boxes etc from T304 stainless steel or high grade where applicable and mandrel bends. Same goes for the flanges, flexipipes and particularly the pre-ordered 100 or 200 cell metal substrate race HFC which are of highest quality. He had quoted £330 for the full 3" y-pipe and £400 for 100 cell race cats (2.5" in and 3" out) but he feels this is an overkill in NA tune, since these HFC's can flow at 99% the flow of a similar sized test pipe and as such maximum gains will be achieved irrespective of it being 2.5" or 3". They will also pass the MOT unlike test pipes thumbs: He has instead proposed making the HFC (2.5" in and out) and the two y-pipe collectors 2.5" into a 3" just like most popular after market kits. In this configuration the y-pipe will cost £275 and the HFC £375 with a 2 year gaurantee However with a decent group buy of at least 3-5 people he will consider less that above as an introductory offer So i am looking for interested takers I will start a list in the following post Note: Personally now, i will order only the custom 100 cell race HFC which is very competitive at that price and but get a K-1 y-pipe from CS or directly from Japspeed at £189 delivered as the only reason i was going to get a custom bullt y-pipe was to match 3" throughout which is an overkill as I now know

See page 1 for sales items please

So glad for you Steve just saw this now see you on the 28th hopefully m8

The chap who runs R-tune Zed meet in Adenau near the Ring runs 19" no problems and i have an offer i can't refuse for a set MPS cup tyres with come in 19" Would you be getting the new zed today?

If you must know, i am focusing on the Mods that are more important to achieving my Nurburgring targets when i go back in july. Cosmetics would have to wait for later! To this effect i need to start raising extra cash for : -2 piece brake kit and track pads -Coilovers and ARB -Custom 3" all through down pipe (100cell cats) and y- pipe. Should get this on tuesday comming week (To complement the fujitsubo) - 19" wheels + MPS cup tyres ( Possibly Dotz mugello wheels) I would consider P/X for any above in decent condition plus cash either way. Been toying with selling my Black heated seats for racing buckets if someone wants them

Hi ZED land This is what i have left now 1-Standard exhaust including + y-pipe(37k miles)...............................£30 + £40 (will sell seperately) 2-OEM GT spoiler (kuro).....................................................................£45ono 3- Black leather electric heated GT4 seats (back on sale).........................................600ono 4- Rear diffuser(FRP)(Brand new)......................................................................................£250 ono[/color] Will be offered to the forum soon in FRP or carbon SHHHHHH! note of this pictures it was just leaning on the bumper it fits flush and level with no modding etc required. will be going on my car as a demo soon. 5- Pair of 20mm Eibach hudcentric spacers (Nearly new).................................................................£80 I will consider swapping/P/x for intreseting new or used mods...so try me Cheers

Tips; -Be prepared! check this site for things you need to drive in europe: http://www.theaa.com/motoring_advice/ov ... dvice.html -Be prepared for the track: you and your car. see; http://www.nuerburgring.de/english/events.html - visit ring sites eg Ben lovejoy's sitehttp://www.nurburgring.org.uk or you tube videos or playstation GT4

+1 i have been toting with this idea but was put off by the possible exhorbitant cost but it seems affordable compared to other mods can't wait for completed pics

Yup, not very far from the truth but it helps to buy the genuine article or a good known kit copy eg like what CS and Co do. any nice work and you will enjoy he end result Need spacers though

Don't sell it.....................You'll need it for the next one you buy + 1

I wouldn't say no to an azure, but i presume this one is an import and i am trying to stay away from them, as i'm after cruise control and alzean leather! Go on Steve Would that be azure350z then eh Mark,sorry about the sale of your Zed but i guess cyprus would be worth it and when you come back you can always get one again. good luck PM sent

Pics with the wing bits! I agree with you m8 was alway my intention to go this route but i have still worked out which skirts match up best this look. i like the INGS+1 N1 skirts and will finally go for this

welcome m8 and good luck.