scottsoulby

cant believe youve not got it swapped yet, think its a bargain offer

cheers for the offer mate, im out there in december so if nothing comes up before hand ill do what you did

thats the thing, it has to be something to do with carbon or fibre, but thats it, the parts im doing are unique, usually not done before, i liked the name carbon creations but found out it had already been used soul-by-fibre, i like it but it made me laugh so im guessing thats a no-go, good effort though

hi guys, since starting all these carbon fibre projects, ive been advised to come up with some sort of company name, so it can be put into my products so they couldnt be copied, and so it would be authentic problem is im crap of thinking up this type of thing, i need something catchy, obviously something to do with carbon fibre and a name somebody hasnt already got? any ideas? Scott

1.H5 2.Chesterfield 3.Dunker 4.Scott 5. ill be a maybe for now depending on the work rota,

140 Euros??? holy crap 3 Z caps and a nissan cap it is then

ive got three Z centre caps and one nissan cap so im looking ideally for one cap, or if anyone knows where to get another set from? pic: thanks

Thanks for the deposits guys Carbon Plenum + spacer - approx £250 1. rtbiscuit DEPOSIT PAID 2. Scott PAID 3. Dblock DEPOSIT PAID 4. Lamby DEPOSIT PAID 5.

on the way home from work, there is a massive straight bit of road, an A road, a little 1.1 fiesta came right up my arse, granted i was only going 50mph, when it tried overtaking me, i noticed it was full of chavs waving at me as they tried to pass, so.... as soon as they were side by side with me, i floored it, leaving them dead on the other side of the road, i kept slowing down so they could try it again, and did the same everytime, made me chuckle a bit

i think the k1 is loud all the time mate, there has been a couple of k1's sold recently so you could hold out for another or contact CS, he has them in stock, the carbon plenum, will give you all the benefits that the original spacer gives, whilst looking great, so there will be slightly more hp and the torque will be better in the midrange and it fits under the standard strut

Envy can sell you the spacer and Both envy and CS can source you an exhaust, was There a particular type of exhaust you was after alternatively I'm in the process of making a carbon fibre plenum with intergrated 5/16 spacer for 250, should be ready in a month or so, currenty taking deposits

That was quick, when would you like to collect?

ive got some 18" Rays for sale. the front wheels are a bit corroded with some laquer peel, the rear arnt to bad, one the front passenger side has curbing, no buckles or dents the front has bridgestone 040 tyres with 4.5mm tread 225/45/18 the rear will need replacing these will make a good winter set, track set, or good to restore to upgrade these are taking up space in the garage so need them shifting 300 pounds ono Pics: the wheels are in s****horpe, collection prefered or you can organise your own courier Thanks for looking Scott

I'm in s****horpe mate, so only about 45 mins away, Ill have a look at the flange to make sure it's ok and we can go from there

ill have a look at the quality of mine, but i have a backbox you can have cheap, if its ok

i can remember, can you pm me a price also while were on it, ive been interested in the rare-rims rota gtr offer, and im stuck between the bronze and white, which do you guys think?

Cheers nurrish, it's about the right price but I'm not a fan of the wheels I've looked through the rare rims thread, I've tried finding a set but there either a too high an offset or not the same colour as each other which then costs more for spacers and colour coding, plus none come with tyres

I'm possibly in the market for a set of alloys new or used, as long as there in a decent state, I've just come back from the mot station needing new rear tyres so I thought I'd have a look out there, I havnt got a mass amount of cash as I've spent it all on the carbon fibre moulds Just wondering if anyone out there fancies selling some?

hi mate, are these still for sale, im interested, will you pm me your best price, thanks

hopefully if its still there tomorrow ill grab a pic of it, otherwise ill try take a sneaky pic of something else, ive got a pic of the motorbike warehouse, loads of parts in there, ill dig it out

have you looked through the rare rims wheel range, there are good packages there that come with tyres, also try CS and Envy

this bit running from both sides? with round holes in?

Ive been in today and paid up for the plenum the things we discussed were mainly the hoses and how we were to make them, i know 2 are for water flow, 1 runs to the brake server and one runs to a sensor, it appears the 2 water ones will not be able to be made as they do not run directly into the plenum itself, they have little tunnels built inside which will be impossible with a carbon remake, so it will be made like the kinetix, the 2 water pipes will just join up together, this had no issues when i ran on the kinetix. As for the other 2 pipes, they do run into the plenum so these wont be a problem, and will be built like OEM. The spacer add on is a simple job, he will make it bigger to start off with and shave it until we get the 5/16 spacer measurements exactly. There wont be the 6 bolts to go through the plenum, again, this is the same as the kinetix, and we just use 6 small bolts to plug the holes on the lower plenum. If there is any questions please dont hesitate to contact me Ive requested the first to be finished by Trax, but with all the celica parts ive ordered, and so little working days until trax i cant imagine either will be acheivable, but he did say they will give it their best shot Scott

doh! ive bought my ticket through another club now, didnt think a 350z stand was possible with so little time, wonder if the ticket is transferable through clubs?