All Activity

For 4.5 hours 9 to 1:30 with stops. They have a good choice of cars. Although many "suspended" probably under maintenance. Good thing about the area can either get a bus and bullet train back to Tokyo. There are other companies that offer rentals without the tour if you wish to explore yourself. Or proceed to Nagoya (Toyota Museums and Factories) then Osaka...48 mins by train apparently.

Good question! Not really sure. To be honest. I need to sort a few small things like getting the number plates mounted properly. Getting the coilovers sitting at the right height and adjusted. I also have to replace some seized camber bolts on the rear spring buckets. To make the alignment spot on. I'd love to get the front bumper filled and smoothed. And the front left arch is showing some rust. So that's probably in the long list. I'd also love to get some reclining bucket seats Installed. The drivers seat is a bit worn and I'm not a massive fan of the seats it came with. Mine is non gt spec. So I don't have power or heated seats. So I've less to loose fitting aftermarket. I'm sure il think of more things also. The list is never done.

They're standard (looking) seats that have been retrimmed, along with the door cards, centre cubby and gear stick gaitor, to match the replaced roof. Gear knob's been changed and the standard Rays have been painted too.

Dunno if you saw this: Lot 712 - 2005 NISSAN 350Z

Brilliant work, she must drive so much better now with fresh shocks and springs all round, arb with poly bushes and rear arms. What's next?

Hi lovely day again nice to see everyone, sorry you could not make it Andy but thanks for organising.

Morning. Admins have been on holiday over the BH weekend, apologies for the slow response. You can't see you post, because you can't post for sale adverts yet - the rules on selling can be found at

Well done chap 👍

Here's the result, the click is gone. Socket size 32mm, torqued it to 180Nm and used some medium thread lock. Put some copper grease into a syringe and squeezed it onto splines at the back of the hub after pushing the axles out a little. Much easier than I expected, didn't even have to use a blow torch I used 4 washers at each side (3 new and 1 old) and as they aren't flat I did a little research and decided the best way to set them up is like this: AXLE ))(( NUT . I did read that 3 washers could make nut to low so 4 was just perfect.

Hve you tried @ZMANALEX?

Fit a 300 cell HFC. Book an MOT while you wait. Drive the car for half an hour before the time slot so the cat is nice and hot.

Id loved to have be out on track with one to see if I could hang on to a Nismo, maybe next time

That’s not bad value actually, £500 to drive an nsx for the day looks a bit of a bargain.

https://www.ebay.co.uk/itm/145828574392?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=QgOzaqmhSF2&sssrc=4429486&ssuid=GvgeIZP3Tde&var=&widget_ver=artemis&media=COPY Assuming DE, HR also available on there.

I’ve looked everywhere and I’m close to giving up, every website seems like they won’t pass an MOT and my only other option is a custom made pair and one of the places I messaged wants 2500 inc vat to make them and fit them which is outrageous in my opinion. Does anyone know where I can get some second hand or new that will actually have a real guarantee to pass the UK MOT emissions. thanks

Please can you tell me if you have any catalytic converters that will pass MOT that will fit a 2005 350z?

Mad to take a step back and look at the stack of rusty parts taken off the car this previous winter. Almost don't want to throw them away. Tempted to maybe get them blast and powder coated to have as spares.

Wow 😲 that looks like one hell of of a experience,and what a choice of cars for that drive

As per title, this is more of a conversion kit, from standard GT bumper to Nismo MK2 with DRLs. We sold hundreds of Nismo bumpers over the years to people doing this conversion kit, all over Europe. As per product listing photos, all parts are separate.

I previously put a post up and had comments on it but now it has disappeared and it says I don’t have permission to view the post. I have messaged admin but nobody is responding. any ideas what’s going on.

Thankyou, not looking for anything big just something to break the slope and the back up abit

Did you get to the bottom of this

2 in stock

10 in stock

Sorry, but sold out at the minute.